Operation Mode (Amateur Transceiver Or Professional Transceiver) - AnyTone AT-3318UV Instruction Manual

OPERATION MODE (AMATEUR TRANSCEIVER OR
PROFESSIONAL TRANSCEIVER)
The transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and
other kinds of functions. According to practical application, you can set the radio to operate as Amateur
Transceiver or Professional Transceiver. There are also 3 levels operation menu to set functions as per you
need. It is easy and convenient.
1.
Operation Mode:
By programming software:
A.
choose "Display Mode", channel mode works as Professional transceiver,
other two modes as Amateur transceiver.
B. By manual setup:
2.
Amateur Transceiver Mode:
as Amateur transceiver mode. Under this mode, press
between Channel mode and VFO.
A. Frequency + Channel mode:
enters into Frequency+Channel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio is turned
off or switched to another channel, the temporary setting will be erased and
back to initial settings.(As pic 1)
B. Channel+Name Tag Mode:
Channel+Name Tag Mode. At this mode, it will display corresponding
channel name when the current channel is edited with name. Otherwise, it
will display frequency + channel. Its operations are the same as frequency +
channel mode. (As pic 2)
In PC software's "General Setting" menu to
Please refer to "Display Mode" in Page 47.
Except setting as CH mode, others considered
At this mode, When set display as "FREQ", it
When set display as "NAME", it enters into
key to switch
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)
03