Pf1 Key Function Setup - AnyTone AT-3318UV Instruction Manual

FUNCTION MENU SETUP
reception. Also when FM Radio is on, quick press of
2. FM Radio activates in either VFO Mode and Channel Mode. In Channel Mode, LCD shows received
frequency with saved channel number to right hand side. In VFO Mode, only received frequency will
show. Press
3. Depending on mode, the keypad can be used to directly enter the number of a saved channel or the
frequency of a desired FM Broadcast station.
4. Depending on mode, rotating Selector Knob will step through saved channels or through VFO
frequencies.
5. Press +

PF1 key Function Setup

1.Press , the top left corner of LCD display "
to enter into function menu.
2.Press / key to choose No.45 function item, it shows "PF1" on LCD.
3.Turn channel switch to choose desired setup.
VOLT: Display current battery voltage.
CALL: Calling.
ALARM: Emergency alarm.
SUBPTT: Sub band PTT.
OFF: Close the key function.
4.Press or
46
to cycle between these two modes.
to scan VFO frequencies. Press
to confirm and exit.
key will mute / un-mute FM Radio.
to end scan when desired station is found.
" icon, then press key