Table of Contents
Advertisement
FUNCTION MENU SETUP
operating in same frequency. If you press PTT, the radio will beep as warning and get back to receiving state.
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO.14 function item, it shows "RPLOCK" on LCD.
3. Rotate channel switch to choose desired setup.
BUSY: Carrier wave lock, transmitting is prohibited when received matching carrier
wave.
REPEAT: Signaling lock, transmitting is prohibited when received matching carrier
but with unmatching CTCSS/DCS.
OFF: Close BCLO function.
4. Press
key or
TX OFF
When this function is on, [PTT] key is unavailable. Current channel of transceiver only works under
receiving mode.
1. Press
key, the top left corner of LCD displays "
key enter into function menu.
2. Press
/
key to choose NO.15 function item, it shows "TX" on LCD.
3. Rotate channel switch to choose desired setup.
ON: TX OFF is enabled.
OFF: TX OFF is disabled.
4. Press
key or
36
key to confirm and exit.
key to confirm and exit.
" icon, then press
" icon, then press
key enter into function
Hide quick links:
Advertisement
Table of Contents
