Table of Contents
Advertisement
7
Shortcut Operations
squelch off/squelch off momeNTARY
key programmed as Squelch Off or Squelch Off Momentary to
monitor the weak signal.
1.
Squelch Off: Press
key to disable squelch, press
to resume squelch.
2.
Squelch Off Momentary: Press and hold
squelch, release
key to resume squelch.
The above functions should be set in programme software.
Squelch level Setup
Setting the radio to a tight squelch level, you can avoid unwanted signals
or noise, but you may not receive a weak signal. Therefore, it will be
14
better for you to select the normal squelch level.
1.
While standby, press
key and turn
selector knob until LCD appears
and current squelch level.
2.
Turn selector knob or press MIC [
/
] key to set desired squelch level.
3.
Press any key except
to exit.
Frequency/Channel Scan
Frequency Scan
In frequency (VFO) mode, this function is designed to monitor signal
of every communicative frequency point of transceiver "step size" you
have set.
key again
key to disable
and
key
1.
In VFO mode, press
for 1s to enter
into frequency scan.
2.
Turn selector knob or press Microphone
[
/
] key to change scan direction.
3.
Press any key except
and
Channel Scan
In channel mode, this function is designed to monitor signal in every
channel.
1.
In channel mode, Press
key for 1s to enter into channel scan.
2.
Turn selector knob or press Microphone
[
/
] key to change scan
direction.
3.
Press any key except
and
to exit.
CTCSS/DCS Encode and Decode setup
Repeatedly press
key to check whether set CTCSS/DCS encode
and decode in current channel or not.
1.
When LCD appears
icon, it means current channel with CTCSS
encode, turn selector knob or press Microphone's [
] key to select desired CTCSS encode.
2.
When LCD appears
and
it means current channel with CTCSS
encode and decode, turn selector knob
or press Microphone's [
/
to select desired CTCSS code.
key to exit.
key
/
icon,
]
Advertisement
Table of Contents
