Automatic Power Off Time Setup; Dtmf Transmitting Time Setup - AnyTone AT-3318UV Instruction Manual

FUNCTION MENU SETUP

Automatic Power Off Time setup

When this function is on, transceiver will automatic power off when reach the preset time.
1. Press key, the top left corner of LCD displays "
menu.
2. Press / key to choose NO. 22 function item, it shows "APO" on LCD.
3. Rotate channel switch to choose desired setup.
30minutes ~ 2hours: Total 3 levels for optional.
OFF: Automatic Power Off Time is disabled.
4. Press key or

DTMF Transmitting Time Setup

1. Press key, the top left corner of LCD displays "
menu.
2. Press / key to choose NO. 23 function item, it shows "DTMF" on LCD.
3. Rotate channel switch to choose desired setup.
50MS: Each DTMF signal transmits 50ms, interval 50ms.
100MS: Each DTMF signal transmits 100ms, interval 100ms.
200MS: Each DTMF signal transmits 200ms, interval 200ms.
300MS: Each DTMF signal transmits 300ms, interval 300ms.
500MS: Each DTMF signal transmits 500ms, interval 500ms.
4. Press key or
40
key to confirm and exit.
key to confirm and exit.
" icon, then press
" icon, then press
key enter into function
key enter into function