FUNCTION MENU SETUP
Offset Frequency setup
This function works through repeater. When repeater receives signals at one frequency, it transmits at the
other frequency. The offset between these two frequencies is called offset frequency.
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO.12 function item, it shows "OFFSET" on LCD.
3. Rotate channel switch to choose desired offset frequency.
Frequency range is 00-70MHZ.
4. Press
key or
Editing Channel name
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO.13 function item, it shows "-" on LCD.
3. Rotate channel switch to choose desired character, press
current character and move shift to next character. Press
previous character.
4. Press
key or
Busy Channel Lockout
BCLO function is used for prohibit transmitting on busy channel, it can prevent disturbing other transceivers
key to confirm and exit.
key to confirm and exit.
" icon, then press
" icon, then press
key to confirm
key back to the
key enter into function
key enter into function
35