Frequency Reverse; Talk Around On/Off - AnyTone AT-3318UV Instruction Manual

FUNCTION MENU SETUP

Frequency Reverse

1. Press key, the top left corner of LCD displays "
menu.
2. Press / key to choose NO.10 function item, it shows "REV" on LCD.
3. Rotate channel switch to choose desired setup.
ON: Turn on Frequency reverse function, TX and RX frequency of current
channel will be interchanged. If CTCSS/DCS signaling is set, it also will be
interchanged.
OFF: Close Frequency reverse function.
4. Press key or

Talk Around ON/OFF

When this function is on, transceiver will cut communication with repeater.
1. Press key, the top left corner of LCD displays "
menu.
2. Press / key to choose NO.11 function item, it shows "TALKAR" on LCD.
3. Rotate channel switch to choose desired setup.
TX=RX: Turn on Talk Around function, current channel will transmit at RX frequency,
if CTCSS/DCS signaling is set, it will interchange decoding CTCSS/DCS
as encoding.
OFF: Close Talk Around function.
4. Press key or
34
key to confirm and exit.
key to confirm and exit.
" icon, then press
" icon, then press
key enter into function
key enter into function