How To Charge - AnyTone AT-3318UV Instruction Manual

BATTERY INFORMATION
▲
Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or
damage the battery.
▲
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.
WARNING:
When keys or ornamental chains and other electric metals contact with the battery terminals, the battery
may cause damage or hurt bodies. If the battery terminal short circuit, it will generate a lot of heat, please
be careful when you bring or use the battery, please put battery or radio into insulated container. Do not put
it into metal container.

How to Charge

1.Plug the AC adaptor into the AC outlet, then plug the
cable of AC adaptor into the DC jack, the indicator
lights orange for 1s and turns into GREEN---waits to
charge.
2.Slide the battery or transceiver with battery into the
charger; make sure the battery terminals are in contact
with the charging terminals well. LED turns into twinkling
RED---pre-charging begins.
3.Pre-charging for about 5 minutes, LED twinkles stop
then charging begins.
4.It takes about 4 hours to fully charge the battery, when
LED turns into GREEN— full charged.
06
Ac Input