Side Key [Pf2] Function Instruction; Edit Channel; Delete Channel - AnyTone AT-3318UV Instruction Manual

BASIC OPERATIONS

Side key [PF2] function instruction

1. Squelch off: Press [PF2] key, squelch circuit is not mute, back-ground noise can be heard. Press [PF2]
key again, squelch circuit is mute.
2. Squelch off Momentary: Press and hold [PF2] key, squelch circuit is not mute, back-ground noise can
be heard. Release [PF2] key, squelch circuit is mute.
3. Transmit DTMF/5TONE/2TONE signaling: Press and hold [PTT] key, then press [PF2] key to transmit
selected DTMF/5TONE/2TONE signaling.
4. Press and hold [PF2] key to turn on transceiver, until transceiver emits "DU" beep, transceiver enter into
general functions setup.

Edit channel

1. Under frequency mode (VFO), enter desired frequency and settings, press
of LCD displays "
2. Rotate channel switch to select desired editing channel number.
3. Press key, the top left corner of LCD displays "
emits "DUDU" beep, channel is stored successfully.

Delete channel

1. Under standby state, press
switch into channel mode, channel number flashes.
2. Rotate channel switch to select desired deleting channel number.
20
" icon, press key to switch into channel mode, channel number flashes.
key, the top left corner of LCD displays "
" icon, press and hold
key, the top left corner
key until transceiver
" icon, press key to