Shortcut Operations; Add/Cancel Optional Signal Decode Function; Ctcss/Dcs Scan - AnyTone AT-3318UV Instruction Manual

SHORTCUT OPERATIONS

Add/Cancel Optional signal decode function

Under standby state, press
press key.
1. LCD display "DTMF" and "
2. Repeat above operation, LCD display "5TONE" and "
in current channel.
3. Repeat above operation, LCD display "2TONE" and "
in current channel.
4. Repeat above operation, LCD display "OFF", the "
NOTE: When this function is on, user must setup 07th menu to be TONE option, then DTMF/5TONE/2TONE
can be used.

CTCSS/DCS Scan

Press key, the top left corner of LCD displays "
enter into CTCSS/DCS scan. Under this state, rotate channel switch to change scan
direction. When scan the matching CTCSS/DCS signaling, it will stay 5seconds and
then go on scanning. Press any other keys except
NOTE: This function is invalid when transceiver works in professional mode or the
arrow directed channel no setting CTCSS/DCS signaling.
In current channel, if signaling set as CTCSS, it will scan CTCSS, if sets as DCS, will scan DCS.
22
key, the top left corner of LCD displays "
" icon, DTMF signal add in current channel.
T
T
" icon, 5TONE signal add
T
" icon, 2TONE signal add
T
" icon disappear, no optional signal in current channel.
" icon, press
, , key to exit.
" icon,
key to