Installing / Removing The Belt Clip; Installing Optional Speaker / Microphone - AnyTone AT-3318UV Instruction Manual

INSTALLATION & CONNECTION

Installing / Removing the Belt Clip

■ Installing the Belt Clip:
Place the belt clip to the corresponding grooves on the back of
the transceiver, and then Clockwise screw it.
■ Removing the Belt Clip:
Anticlockwise turn screws to remove the belt clip.

Installing Optional Speaker / Microphone

Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
Note:The transceiver is less water resistant while using the
Speaker/Microphone.
10