FUNCTION MENU SETUP
CTCSS/DCS Decode Setup
If this function is enabled, you can ignore (can not hear) other unrelated call at the same frequency.
1. Press
key, the top left corner of LCD displays "
key to enter into function menu.
2. Press
/
key to choose NO. 02 function item, it shows "R-CDC" on LCD.
3. Press
key to choose CTCSS,DCS or OFF, when DCS signaling is selected,
press
key to choose DCS positive or inverse code.
4. Rotate channel switch to choose desired CTCSS/DCS code.
CTCSS:62.5HZ~254.1HZ,51 groups in total, and 1 group user-defined code.
DCS: 000N-777I, 1024 groups in total. "N" stands for positive code, "I" stands
for inverse code.
5. Press
or
key to confirm and exit.
Note: User-defined CTCSS decode must be setup by programming software.
CTCSS/DCS Encode/Decode Synchronous Setup
This function is for adjusting CTCSS/DCS encode/decode synchronous.
1. Press
key, the top left corner of LCD displays "
key to enter into function menu.
2. Press
/
key to choose NO. 03 function item, it shows "RT-CDC" on LCD.
" icon, then press
" icon, then press
29