INSTALLATION & CONNECTION
Installing / Removing the Li-ion Battery
1. Match the three grooves of the battery pack with the corresponding
guides on the back of the transceiver and push.
2. Press the battery pack and transceiver firmly together until the
release latch on the top of the transceiver locks. After hearing a
"click" sounds, the battery has been locked.
3. To remove the battery pack, slide up the release latch and
remove the pack away from the transceiver.
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna base and turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.
09