FUNCTION MENU SETUP
Band Limit
When this function is on, inputting frequency or Scanning frequency under VFO is limited in current VFO
frequency band.
1. Press
key, the top left corner of LCD displays "
menu.
2. Press
/
key to choose NO.16 function item, it shows "BAND" on LCD.
3. Rotate channel switch to choose desired setup.
ON: Band limit is enabled.
OFF: Band limit is disabled.
4. Press
key or
Sub Band Display Setup
1. Press
key, the top left corner of LCD displays "
key enter into function menu.
2. Press
/
key to choose NO.17 function item, it shows "DSPSUB" on LCD.
3. Rotate channel switch to choose desired setup.
FREQ: Display sub band frequency or channel.
VOLT: Display current battery voltage.
OFF: Sub band display is disabled.
4. Press
key or
key to confirm and exit.
key to confirm and exit.
" icon, then press
" icon, then press
key enter into function
37