Table of Contents
Advertisement
SHORTCUT OPERATIONS
Single-band Switching
To reduce the interference from the sub-channel when the main channel be used. You
can use single-band switching function, turn off the sub-channel bands quickly.
1. In standby mode, press the
turn off the processor channel.
2. Click the
button again, the radio will display the processor channel, and turn
off the PC channel.
3. Press the
button again to return to dual-band show.
CTCSS/DCS encode and decode
1. Press
key then press [PF2] to enter into setup.
2. Press [PF2] key to choose CTCSS, DCS or OFF, when choose DCS, press
or negative code.
3. Rotate Channel selector to choose desired CTCSS/DCS encode and decode.
4. Press
key or
button, the radio will display the PC channel, and
key to confirm and exit.
key to select positive
27
Hide quick links:
Advertisement
Table of Contents
