Using The Ir Remote Control - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
Control mode, it will turn on/off PTZ light.
•
EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing text fields, it will
also function as a Backspace button to delete the character in front of the cursor. On checkbox fields,
pressing the EDIT/IRIS+ button will tick the checkbox. In PTZ Control mode, the EDIT/IRIS+ button
opens up the iris of the camera. In Playback mode, it can be used to generate video clips for backup.
•
PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen and
multi-screen mode. In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+
button. It can also be used to select entire masked areas, such as in Motion Detection and Privacy Mask
menus.
•
F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also bring up the Channel
& OSD Position settings.
•
PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ
Control mode, it is used to close the iris of the PTZ camera.
8. Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR. Some uses include:
•
Switching to the corresponding channel in Live View or PTZ Control mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playback mode.
9. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu.
It will move the selection up and down. In the Playback mode, the ring is used to jump 30s
forward/backward in video files. In Live View mode, it can be used to cycle through different channels.
10. Left and Right Button: The left and right button can be used to move the active selection in a menu. It will
move the selection left and right. In the Playback mode, the buttons can be used to speed up/slow down the
video. In live view mode, it can be used to cycle through different channels.
Note:
If GUARD indicator is blue (default), all alarm event and exception settings are valid. Otherwise, alarm
event and exception settings will be invalid, but normal recording will still be available.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you're able to edit its content. After you're done entering text, you must hit the ENTER button to be
able to move on to the next field.

Using the IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 8.
Batteries (2×AAA) must be installed before operating.
18