User Manual of DS-9000/9100/9600 Series DVR
Server to be used with your DVR.
5.
Click OK to save and exit the Network Settings menu.
Configuring PPPoE Settings
Your DVR also allows for Point-to-Point Protocol over Ethernet (PPPoE) access. To set up PPPoE access:
1.
Enter the Network Settings menu by clicking Menu > Settings > Network.
2.
Select the General tab, as shown in Figure 3.
Figure 3. Network Settings Menu
3.
Select the Advanced tab. This will take you to the advanced network settings menu, shown in
Figure 4.
Figure 4. Advanced Network Settings
4.
Click the Set button next to PPPoE to enter PPPoE settings menu, shown in Figure 5.
77