User Manual of DS-9000/9100/9600 Series DVR
Figure 10. Host/Others Menu
5.
Click OK to save and exit menu.
Configuring MTU
MTU is the abbreviation of Maximum Transmission Unit. Unit is represented by bytes.
To change MTU:
1.
Enter the Network Settings menu by clicking Menu > Settings > Network.
2.
Select the Advanced tab.
3.
Click the Set button next to Host/Others to enter the Host/Others menu.
4.
Enter new MTU for this device, as shown in Figure 11.
Figure 11. Host/Others Menu
Note:
The virtual value of MTU is from 500 to 9676.
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network
Settings menu. The default server port is 8000 while the default HTTP port is 80.
81