User Manual of DS-9000/9100/9600 Series DVR
video clip during playback.
3.
Repeat for additional clips.
4.
Click the Quit Playback button to exit from the Playback interface. You'll then be prompted to
save the clips, as shown in Figure 8.
Figure 8. Video Clips Save Prompt
5.
Click the Yes button to enter Backup interface or select No to exit to Playback interface.
6.
At the Backup interface, select the Start button to begin the Backup process.
• Using the Front Panel / Remote:
1.
Enter into the Playback interface (See Playing Back a Recording).
2.
During playback, press the EDIT button to mark start of clip.
3.
Press the EDIT button again to mark end of clip.
4.
Repeat for additional clips.
5.
Press the ESC button to exit from the Playback interface. You'll then be prompted to save the
clips, as shown in Figure 8.
6.
Click the Yes button to enter Backup interface or select No to exit to Playback interface.
7.
At the Backup interface, select the Start button to begin the Backup process.
Exporting Files via e-SATA
DVR provides the e-SATA port on the rear panel as an option, you can back up the recorded files via e-SATA
port by using external SATA disk.
To export recorded files via e-SATA:
1.
Enter the Record Settings menu by clicking Menu > Settings > Record
2.
Click Advanced tab, it will take you to the e-SATA property configuration, as shown in
Figure 9, select For Export option in the drop-down list, the DVR will ask for reboot to take
effect.
Figure 9. E-SATA Property Settings
3.
You may go to recorded files export interface following the above explanation in section
Exporting Files or Exporting Video Clips. The Export menu appears as shown in Figure 10.
57