User Manual of DS-9000/9100/9600 Series DVR
Figure 17. Migration is Complete
Note:
After the array migration is complete, the array and each virtual disk capacity will be refreshed. Now, it
needs to reboot the device and expand capacity for each virtual disk. Please refer to the Expanding HDD Capacity
section of Chapter 12 for expanding capacity of virtual disk.
Configuring Virtual HDD
Creating Virtual Disk
To create a virtual disk:
1.
Enter the RAID Settings menu by clicking Menu > Settings >RAID.
2.
Select the Array tab to enter the Array interface, as shown in Figure 18.
Figure 18. Array
3.
Select the array from the list for creating virtual disk.
4.
Click the Create Vd button to enter the Create Virtual Disk interface.
Note:
Up to 8 virtual disks can be created for the array.
107