Deleting A User - HIKVISION DS-9000 Series User Manual

Hide thumbs Also See for DS-9000 Series:
Table of Contents

Advertisement

User Manual of DS-9000/9100/9600 Series DVR
Remote Configuration: Remotely configure parameters, restore parameters to factory
defaults and import settings to as well as export settings from DVR.
Remote Camera Management: Remotely enable and disable analog channels. Add and
delete IP cameras.
Remote Serial Port Control: Configure settings for RS232 and RS485 ports.
Remote Video Output Control: Send remote button control signal.
Two-Way Audio: Ability to use two-way radio between the remote client and the DVR.
Remote Alarm Control: Remote alert or control the relay output of the DVR. Alarm and
exception settings must be configured properly to upload to host.
Remote Advanced Operation: Remotely manage hard disk drives (initializing and setting
properties for HDDs). Ability to remote update system firmware and stop of the relay
output
Remote Shutdown/Reboot: Remotely shutdown or reboot the DVR.
8.
Click on the Camera Permission tab to configure channel privileges, as shown in Figure 8. The
channel Settings include:
Figure 8. Camera Permission Menu
Remote Live View: Select and view live video over the network.
Local Manual Record: Locally start and stop manual recording on any of the channels.
Remote Record Starting: Remotely start and stop manual recording on any of the
channels.
Local Playback: Locally play recorded files that are on the DVR.
Remote Playback: Remotely play and download recorded files that are on the DVR.
Local PTZ Control: Locally control PTZ cameras.
Remote PTZ Control: Remotely control PTZ cameras.
Local Video Export: Locally backup recorded files from any of the channels.
9.
Click the OK button to save and exit menu.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.

Deleting a User

To delete a user from the DVR:
1.
Enter the User Settings menu by clicking Menu > Settings > User.
2.
Select user to delete.
3.
Click the Delete button to delete user.
4.
Click the OK button to exit menu.
124

Advertisement

Table of Contents
loading

Table of Contents