Configuring Network Detection - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Configuring Network Detection

You can obtain network connecting status of DVR through the network detection function, including network
delay, packet loss, etc.
Testing Network Delay, Packet Loss
To view network traffic:
1. Enter the Network Traffic interface by clicking Menu > Maintenance > Network Detection.
2. Click the Detection tab to enter the Network Detection menu, as shown in Figure 15.
Figure 15. Network Detection Interface
3. Enter the destination address in the text field of Destination.
4. Click the Test button to start testing network delay and packet loss. The testing result will pop
up on the window. If the testing is failed, the error message box will pop up as well. Refer to
Figure 16.
Figure 16. Testing Result of Network Delay and Packet Loss
Exporting Network Packet
By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk,
SATA/eSTATA CD-RW and other local backup devices.
To export network packet:
1. Enter the Network Traffic interface by clicking Menu > Maintenance > Network Detection.
2. Click the Detection tab to enter the Network Detection interface.
3. Select the backup device from the dropdown list of Device Name, as shown in Figure 18.
Note:
Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect
the backup device, please check whether it is compatible with the DVR. You can format the backup device if the
format is incorrect.
84