Using The Setup Wizard - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Using the Setup Wizard

By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 2. The Setup Wizard will
walk you through some of the more important settings of your DVR. If you do not wish to use the Setup Wizard at
this time, click the Cancel button. You may also choose to use the Setup Wizard at a later time by leaving the
"Start Wizard when DVR starts?" checkbox checked.
Figure 2. Setup Wizard
To start using the Setup Wizard:
1. Configure User Permission
1) Click the Next button on the Wizard window. This will take you to the User Permission window,
shown in Figure 3.
Figure 3. User Permission
2) Navigate to the Admin Password input field.
3) Enter the admin password into the Admin Password input field. By default, the password is 12345.
4) To change the admin password, check the New Admin Password checkbox. Enter the new password
and confirm the password in the given fields.
5) Click the Next button to enter the time settings Setup Wizard window.
2. Configure Time Settings
25