Using Digital Zoom - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
1. Go to playback interface and play the video
2. Right-click mouse and select Dynamic Analysis to go to analysis area selection interface
3. You can left-click the mouse and drag an area for motion detection analysis, then right-click
mouse you will get popped up menu.
Figure 11. Right-click menu when dynamic analysis
4. Before selecting Analyze to start analysis, you also can select full-screen detection, configure the
sensitivity level, etc.
5. You will go to playback interface with the result of smart search which is indicated by green line
clips in the recording type line
Figure 12. Playback time line after dynamic analysis
6. Right-click mouse you will find popped up menu as below
Figure 13. Right-click menu when playback
You can select Dynamic Analysis to re-drag the analysis area and to re-analyze it, on the other hand, you can
select Previous Dynamic to go to the previous event clip or Next Dynamic to go to the next event clip.

Using Digital Zoom

To use digital zoom in Playback mode:
1. Enter Digital Zoom mode by right-clicking with the mouse in Playback and selecting Zoom.
2. Left-Click and drag red box for desired magnification area, as shown in Figure 14. The selected
area will be zoomed to full screen.
51