Navigating Ptz Menus; Configuring Ptz Settings - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Navigating PTZ Menus

PTZ menus can be navigated through with either the mouse or the front panel/remote. For quick access to certain
PTZ settings, right clicking with the mouse in a display while in PTZ control mode will bring up the PTZ settings
menu. This menu is shown in Figure 1.
Figure 1. Mouse PTZ Settings Menu
The items that can be found on this menu include:
•
Camera: Select a PTZ camera.
•
Call Preset: Call a PTZ preset.
•
Call Patrol: Call a PTZ sequence.
•
Call Pattern: Call a PTZ pattern.
•
Preset Settings: Enter PTZ preset configuration menu.
•
Patrol Settings: Enter PTZ patrol configuration menu.
•
Pattern Settings: Enter PTZ pattern configuration menu.
•
PTZ Menu: Enter the menu of PTZ.
•
PTZ Settings: Enter PTZ setting menu.

Configuring PTZ Settings

Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the PTZ and
RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Settings menu by clicking Menu > Settings > PTZ. The PTZ Settings menu is
shown in Figure 2.
87