User Manual of DS-9000/9100/9600 Series DVR
9.
Select cameras to trigger for recording when motion is detected by checking the checkboxes
under the desired cameras.
10. Select Schedule tab to set arm time, 8 periods can be set.
11. Click OK to complete motion settings for the selected camera.
You may now add a schedule to start recording when motion is detected (See Scheduling a Recording).
Setting up Sensor Alarms
Recordings can also be triggered from an external sensor alarm device. To setup sensor alarms:
1.
Enter into the Alarm Management menu, shown in Figure 6.
Figure 6. Alarm Management Menu
2.
Select the Alarm Input # and click the Set button. This will open the Alarm Input Setting menu,
shown in Figure 7.
Figure 7. Alarm Management Settings
3. Set the alarm input type. The options available are Normally Opened (N.O.) and Normally
Closed (N.C.).
4.
Check the checkbox next to Setting and click the Handle button to enter the Alarm Input Handle
menu.
5.
Select the Triggered Camera tab.
6.
Select cameras to trigger for recording when alarm occurs by checking the checkboxes under the
desired cameras, as shown in Figure 8.
62