Playing Back From System Log; Playing Back Frame-By-Frame; Smart Search - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Playing Back from System Log

You may also playback recordings from the System Log.
To playback video from the System Log:
1. Enter the Log Search menu by clicking Menu > Maintenance > Log Search (shown in Figure
10).
2. Set Start time and End Time.
3. Click Search button, after search results are presented, select a log item and click Play button to
playback the associated video directly. Attention message will appear if there is no video associated with the
log.
Figure 10. Log Search Menu

Playing Back Frame-by-Frame

To playback frame-by-frame in the Playback interface:
• Using a Mouse:
1. Click the Slow Forward button on the Playback Control Panel until the speed changes to
Single frame.
2. Click the Pause button to advance the video frame by frame.
• Using the Front Panel/Remote:
1. Rotate the inner control on Jog Shuttle counterclockwise or press the Down button to set the
play to Single frame.
2. Press the OK button.
3. Press the Enter button to advance the video frame by frame.
Note:
For DS-9000/9100-SH/RH series and DS-9600 series DVR, the way to control play speed is a little
different with DS-9000/9100-S series DVR, please refer to the front panel explanation in this manual for details.

Smart Search

In order to locate motion detection event easily and accurately in the playback progress line, the users are allowed
to analyze a certain area (scene) dynamically, and to get all of the related motion detection events that occurred in
this area.
Note:
The smart search function is only available for analog channels.
To use dynamic analysis function:
50