Configuring An Ntp Server - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
(Figure 6).
•
DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org) (Figure 7).
Under DVR Domain Name, enter the domain obtained from the DynDNS web site. Lastly,
enter the User Name and Password registered in the DynDNS network.
•
NO-IP: Enter the account information in the corresponding fields. Refer to the Dyndns
settings.
Figure 7. DynDNS Settings

Configuring an NTP Server

A Network Time Protocol (NTP) Server may also be setup on your DVR to keep the date and time current and
accurate.
To setup an NTP server:
1. Enter the Network Settings menu by clicking Menu > Settings > Network.
2. Select the Advanced tab.
3. Select the Set button next to NTP to enter the NTP settings menu, as shown in Figure 8.
Figure 8. NTP Settings Menu
4. Check the NTP checkbox to enable feature.
5. Set NTP settings:
•
Synchronize Every: Time in minutes to synchronize with NTP server.
•
NTP Server: IP address of NTP server.
•
NTP Port: Port of NTP server.
6. Click OK to save and exit menu.
79