Customizing Presets; Customizing Patrols - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Customizing Presets

Presets can be set to move your PTZ camera to a desired preset location at the click of a button.
To setup and use custom PTZ presets:
1. Enter the PTZ Control interface, shown in Figure 3 by clicking PTZ in the mouse menu or the
PTZ button on the front panel.
2. Select the Preset button to enter the Preset Management menu.
3. In the Preset Management menu, shown in Figure 4, you may:
•
Configure Preset: Use the PTZ control panel to adjust the position of the preset. Select a
Preset number and click the Set button to save preset location.
•
Clear Preset: Select a Preset number and click the Clear button to delete the preset. You
may also select the Clear All button to delete all presets.
•
Call Preset: Select a Preset and click the Call button.
Figure 4. Preset Management Menu
Note:
Only valid presets can be called and deleted.

Customizing Patrols

Patrols can be setup to move the PTZ to different key points and have it stay there for a set duration before
moving on to the next point. The key points are defined by presets which can be set following the steps above in
Customizing Presets.
To set up and use PTZ patrols:
1. Enter the PTZ Control interface, shown in Figure 3 by clicking PTZ in the mouse menu or the
PTZ button on the front panel.
2. Select the Patrol button to enter the Pareol Management menu, shown in Figure 5.
89