Setting Camera Order; Channel Zero Encoding - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Setting Camera Order

Setting the camera order allows you to logically position cameras for more efficient monitoring of your own
individual location.
Figure 6. Camera Order Setting
To set the camera order:
1. Enter the Display Settings menu, shown in Figure 6 (Menu > Settings > Display).
2. Click the Set button.
3. Select the display mode you would like to set the camera order for under Mode.
4. Using the up and down button at each display, select the camera you would like to set. Setting an
'X' will mean the camera will not be displayed.
5. Click the OK button.

Channel Zero Encoding

Sometimes the user needs to remote view a lot of cameras simultaneously from web browser or CMS software, in
order to decrease the bandwidth requirement in case that the image quality is not strictly required, zero channel
encoding feature is supported as an option for users.
Enter the Display Settings menu and select Channel Zero Encoding tab, shown in Figure 7.
Figure 7. Channel Zero Encoding
The video source of channel zero is from video Aux output, the users are allowed to configure the video divisions,
camera order and dwell time for channel zero.
Note:
The channel zero does not support sub stream, only main stream is available.
36