Understanding Exception Trigger Options; Intelligent Analysis - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
To set exceptions:
1. Enter the Exception menu by clicking Menu > Settings>Exception.
2. Select the exception to configure under Exception Type.
3. Select triggering options, as shown in Figure 19. Trigger options are further explained in the next
section (See Understanding Exception Trigger Options).
Figure 19. Exception Menu
4.
Click OK to save and exit Exception menu.

Understanding Exception Trigger Options

When setting up exception handlers for such features as motion detection and sensor alarms, you may select
triggering options to alert you of these exceptions.
The triggering options that you may select include:
•
Pop-up Image on Monitor: When an alarm is triggered, the local monitor (VGA or BNC monitor)
will display an image under Live View mode. This alarm can be configured under the Popup Alarm
Image handle method. For alarms that are triggered simultaneously, images will be displayed one at
a time every 10 seconds (default dwell time). A different dwell time can be set by going to Menu >
Settings > Display > Dwell Time. Once the alarm stops, cycling of the images will also stop and
you'll be returned to the Live View screen.
•
Audio Warning: Trigger an audible beep when exception is detected.
•
Notify Surveillance Center: Sends a signal to remote alarm host when exception is detected (See
Configuring a Remote Alarm Host).
•
Trigger Alarm Output: Trigger an alarm output when exception is detected. Alarm output can be
configured by following the steps listed in Setting Up Sensor Alarms.
•
Send Email: Sending email when exception is detected. Sending email can be configured by
following the steps listed in Configuring E-mail Settings.

Intelligent Analysis

Intelligent analysis module is an option and available only for DS-9000/9100HFI-RH DVR. Before use, you may
need to install the intelligent board(iDS-90xxE/B) to the slot of DVR's mainboard. The resolution of HDMI will
decrease to 1024×768 automatically when the intelligent module is activated, the Intelligent menu will appear in
Settings as well, Shown in Figure 20.
68