Deleting Virtual Disk - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
Figure 19. Create Virtual Disk
5. Edit the name of virtual disk and set the capacity.
Note:
At least 100GB capacity must be configured for each virtual disk.
Initialization (Foreground): The foreground initialization usually takes long time, which depends on the
HDD capacity. During the foreground initialization, the virtual disk is not allowed to use.
Initialization (Background): The background initialization usually takes long time, which depends on the
HDD capacity. During the background initialization, the virtual disk is allowed to use.
Initialization (Fast): The fast initialization usually takes short time, which is not relevant to the HDD
capacity.
It is recommended to select the foreground initialization when the hard disk is used on the DVR for the first
time.
6. Click the OK button to confirm the creation of virtual disk.
7. Return to the RAID Settings menu.
8. Click the Virtual HDD tab to enter the Virtual HDD interface. The created virtual disks will be listed
on the interface.
Figure 20. Created Virtual Disk

Deleting Virtual Disk

To delete a virtual disk:
1. Enter the RAID Settings menu by clicking Menu > Settings >RAID.
2. Click the Virtual HDD tab to enter the Virtual HDD interface.
3. Select the virtual disk from the list to be deleted.
4. Click the Delete button.
108