User Manual of DS-9000/9100/9600 Series DVR
Figure 2. More Settings Menu
3.
Configure settings, including:
•
Device Name: Name to use for DVR.
•
Device No.: Device number to use for DVR.
•
CVBS Output Brightness: Video output brightness.
•
Transparency: Menu transparency.
•
Operation Timeout: Set timeout time for menu inactivity. For example, if timeout time was
set to 5 minutes, after 5 minutes of inactivity in the General Settings menu, you'll be
returned to the Live View.
•
Event Hint: To display hint when live view, if exception happens.
•
Enable Output Hint: To display output status in live view.
•
CVBS Scaling: Enable/disable video output scaling for main/aux video output.
Configuring RS-232 Port Settings
To configure RS-232 devices to be used with the DVR:
1.
Enter the RS-232 Settings menu, shown in by clicking Menu > Settings > RS232.
Figure 3. RS-232 Settings Menu
2. Configure RS-232 Settings.
3.
The RS-232 port can be used in two ways:
•
Parameter Control: Connect a PC to the DVR using the PC serial port. Device
parameters can then be set using software such as HyperTerminal. The serial port
121