Customizing Patterns - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
Figure 7. Patrol Management Menu

Customizing Patterns

Patterns can be setup by recording the movement of the PTZ.
To setup and use PTZ patterns:
1. Enter the PTZ Control interface, shown in Figure 3 by clicking PTZ in the mouse menu or the
PTZ button on the front panel.
2. Select the Pattern button to enter the Pattern Management menu, shown in Figure 8.
Figure 8. Pattern Management Menu
3. Select a Pattern Number.
4. To record a new pattern, select the Run Record button to start recording of the movements of the
PTZ. Use the PTZ control panel to move the PTZ. The PTZ movements will be recorded until
the Stop Record button is clicked.
5. To run a pattern, click the Run Pattern button on a valid pattern. The PTZ will move according
to the path that was defined until Stop Pattern is clicked.
6.
Click OK to save and exit from menu.
91