Configuring Osd Settings - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR
Figure 4. Camera Management Menu
9. Click OK to exit out of the Camera Management menu.
To adjust IP camera compression settings:
1. Enter the Record Settings menu, shown in Figure 5 by clicking Menu > Settings > Record.
Figure 5. Record Settings Menu
2. Select the General tab.
3. Select the IP camera to configure next to the Camera label.
4. Adjust IP camera compression settings. If the IP camera was added successfully, the DVR will
show OSD, channel name and the compression parameters in accordance to the IP camera's
current settings.
5. Select the Sub stream next to the Encoding Parameters to set sub stream parameters. Sub
stream is only used for live video viewing.
6. Click OK to save and exit out of menu.
Note:
The quality of resolution, frame rate and bit rate depends on the performance of the IP camera.

Configuring OSD Settings

On Screen Display (OSD) settings can be configured in the Camera Management menu. The OSD is shown in
each display during Live View mode and includes the time and date as well as the camera name.
To configure OSD settings:
95