Migrating Array - HIKVISION DS-9000 Series User Manual

User Manual of DS-9000/9100/9600 Series DVR

Migrating Array

If it needs to add the physical HDD during the normal working of array to enhance the security, you can take the
array migration.
To migrate an array:
1. Enter the RAID Settings menu by clicking Menu > Settings >RAID.
2. Select the Array tab to enter the Array interface, as shown in Figure 15.
Figure 15. Array
3. Select the array for migration.
4. Click the Migrate button to enter Migrate Array interface.
Figure 16. Migrate Array
5. Select the target RAID level and physical HDD for array migration.
6. Click the OK button to start the array migration.
Note:
1) Make sure virtual disks have been created before operating array rebuilding. Or else, corresponding
message box will pop up.
2) Currently the migration to RAID 5 is supported only.
7. Return to the Array interface to view the migrating progress.
106