Drive Enclosure; Front; Figure 1.4 Front View Of A 2.5" Type Drive Enclosure; Figure 1.5 Front View Of A 3.5" Type Drive Enclosure - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 1 Component Names
1.2

Drive Enclosure

1.2 Drive Enclosure
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
Three types of drive enclosures are available; a 2.5" type, a 3.5" type, and a high-density type.
1.2.1

Front

This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type

Figure 1.4 Front View of a 2.5" Type Drive Enclosure

1 2
3
1. Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type

Figure 1.5 Front View of a 3.5" Type Drive Enclosure

2
1
3
1. Operation panel
2. 3.5" drive
3. Flange cover
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
21
Copyright 2014 FUJITSU LIMITED
3
3
P3AM-7732-05ENZ0