Fujitsu ETERNUS DX500 S3 Configuration Manual page 126

Chapter 7 Advanced Copy Settings
7.2 Performing a Copy (SnapOPC+)
10
Use the same method to create sessions for the remaining six generations.
Specify from "No.: 3, Name: sdv1" through to "No.: 8, Name: sdv6" for the copy destination volumes.
11
After all of the sessions are created, click the number of sessions in [SnapOPC+ Sessions].
12
Check the status of the copy source volume and the copy destination volume.
In this case, the copy source volume number is "0" and the copy destination volume numbers are from
"1" through to "7".
13
Open [Disk Management] from [Computer Management].
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
126
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0