Preface Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system (hereinafter referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or non-Fujitsu servers.
Windows Server 2008 R2 for Itanium-Based Systems ® ® Microsoft Windows Server 2008 HPC Edition ® ® Microsoft Windows Server 2008 R2 HPC Edition FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
This indicates supplementary and reference information. ■ Abbreviations Used in This Manual "ETERNUS DX500 S3" refers to the FUJITSU Storage ETERNUS DX500 S3 Disk storage system and "ETERNUS • DX600 S3" refers to the FUJITSU Storage ETERNUS DX600 S3 Disk storage system.
Page 6
The black "Must Do..." circle indicates actions that must be taken. The required ac- tion is both illustrated inside the black disk and written above it (e.g. Unplug). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED...
Page 7
- Be careful that no liquid seeps into the ETERNUS DX when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS DX. Warning layout ribbon FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
2.1.1 Placement in the Rack ............................37 2.1.2 Cable Connection ..............................38 2.2 Installable Racks .......................... 48 2.2.1 Fujitsu Racks ...............................48 2.2.2 Non-Fujitsu Racks ...............................48 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Page 9
Connection Example 3 (ETERNUS DX600 S3 Connections in the Same Rack)..........46 Figure 2.9 Connection Example 4 (ETERNUS DX600 S3 Connections in Multiple Racks) ..........47 Figure 2.10 Unit Installation Area ..........................49 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Page 10
Table 2.1 Enclosure Installation Order ........................37 Table 2.2 Usage of Cables for Connecting Enclosures....................39 Table 2.3 Specifications for the Unit Installation Area .....................49 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
This chapter explains the installation of the ETERNUS DX. Installation Specifications 1.1.1 ETERNUS DX500 S3 The following table shows the installation specifications of the ETERNUS DX500 S3. Table 1.1 ETERNUS DX500 S3 Installation Specifications Item ETERNUS DX500 S3 482 ´ 805 ´ 133mm (3U)
Page 12
*2: These values are for each drive enclosure when 24 drives are installed in a 2.5" type drive enclosure, 12 drives are installed in a 3.5" type drive enclosure, or 60 drives are installed in a high-density drive en- closure. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
3.5" type AC 100 – 120V 1,300kJ/h AC 200 – 240V 1,300kJ/h High-density AC 100 – 120V 4,700kJ/h type AC 200 – 240V 4,700kJ/h FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Page 14
*3: These values are measured when a single controller enclosure and four drive enclosures are configured in an environment in which the temperature is 23 ± 2 °C. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED...
The following diagrams show the dimensions of a controller enclosure. The dimension values do not include any protruding parts (approximation). Figure 1.1 Controller Enclosure Dimensions Side 482mm Front FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
The diagrams below show the dimensions of a 2.5" type drive enclosure. The dimension values do not include any protruding parts (approximation). Figure 1.2 2.5" Type Drive Enclosure Dimensions Side 482mm Front FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
The diagrams below show the dimensions of a 3.5" type drive enclosure. The dimension values do not include any protruding parts (approximation). Figure 1.3 3.5" Type Drive Enclosure Dimensions Side 482mm Front FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
The diagrams below show the dimensions of a high-density drive enclosure. The dimension values do not include any protruding parts (approximation). Figure 1.4 High-density Drive Enclosure Dimensions Side 482mm Front FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
For details on the specification information that is required for securing a rack, refer to Figure 1.10. Figure 1.5 19-inch Rack Dimensions 700mm 1,050mm Front Rear Side Bottom FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
*2: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual pack- age. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Figure 1.7 Installation and Service Areas (When a High-density Drive Enclosure is Installed_1) Rear service area 850mm or more ETERNUS DX 1000mm Front service area or more 500mm or more 1800mm or more FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Figure 1.9 Service Area (When a High-density Drive Enclosure is Installed in the Top Part of the Rack) Service area above 500mm or more the rack Rack: front FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Estimate the amount of heat in the exhaust air from the ETERNUS DX by using the heat generation amount and exhaust air amount that are listed in "1.1 Installation Specifications" (page 11). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
If the condition above is not satisfied, additional measures are required to ensure sufficient load bearing ca- pacity. Contact your installation contractor for details about the necessary measures that must be taken. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
For power distribution units, make sure that the total rating of the currents for all of the power supply units that are to be connected does not exceed the normal usage rating of the power distribution unit. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED...
Used for connection be- NEMA L6-15P NEMA L6-15R 4.0m Rating: 250V 10A tween the ETERNUS DX (Normal usage rating: and the socket (IEC60320-C13 n NEMA L6-15P) FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Power distribution unit (AC200-240V, 2U, 16 outlets) ● Power Distribution Units (1U) There are four outlets. Figure 1.11 Power Distribution Units (1U) Four outlets Two inlets FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Four power sockets are required for each high-density drive enclosure. ■ With Power Distribution Units Two power sockets are required for each power distribution unit. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Power distribution unit (AC200-240V, 2U, 16 outlets) AC 200 – 240V — ETERNUS DX (without power distribution units) AC 100 – 120V AC 200 – 240V FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Line 0 Line 1 Distribution Distribution board board ↓ To power supply facility ↓ To power supply facility PSU: Power Supply Units Circuit Protector FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Line 0 Line 1 Distribution Distribution board board ↓ To power supply facility ↓ To power supply facility PSU: Power Supply Units Circuit Protector FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
AC input system for the ETERNUS DX into a dual system (line 0 and line 1). Figure 1.17 Input Power Supply Lines (When Connecting to Power Sockets) ETERNUS DX Power distribution unit Line 1 Line 0 FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Power distribution unit ETERNUS DX Power distribution unit Drive enclosure Drive enclosure Line 0 Line 1 Controller enclosure FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
If drive enclosures are to be added in the future, securing sufficient space for power distribution units in • the bottom of the rack is recommended. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Figure 2.1 AC Cable Connection Rack-1 Rack-2 AC cable Controller Enclosures Drive Enclosures PDU: Power Distribution Unit FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Reverse cabling when five or more 2U drive enclosures are installed • When crossing over racks • 6.0m Used as extension cables for connections between racks. FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Obtaining extra extension cables for reverse cabling to connect the controller en- closure to the last drive enclosure is required. Figure 2.2 Connection Example 1 (ETERNUS DX500 S3 Connections in the Same Rack) DE#16 (2U) DE#06 (2U)
For this type of configuration, connections between enclosures can be performed with the cables that are provided with the drive enclosures. Obtaining extra extension cables for reverse cabling is not required. Figure 2.3 Connection Example 2 (ETERNUS DX500 S3 Connections in the Same Rack) DE#12 (4U)
2U drive enclosures in the same rack. For this type of configuration, obtaining extra extension cables to connect 4U drive enclosures and 2U drive enclosures is required. Figure 2.4 Connection Example 3 (ETERNUS DX500 S3 Connections in the Same Rack) DE#13 (2U) DE#03 (2U)
The following figure shows an example when one controller enclosure and twenty 2U drive enclosures are distributed between two racks. Obtaining extra extension cables for these connections between the racks is required. Figure 2.5 Connection Example 4 (ETERNUS DX500 S3 Connections in Multiple Racks) DE#16 (2U) DE#06 (2U)
Figure 2.7 Connection Example 2 (ETERNUS DX600 S3 Connections in the Same Rack) DE#11 (4U) DE#01 (4U) DE#30 (4U) DE#20 (4U) DE#10 (4U) DE#00 (4U) Cables that are supplied as standard 3.5m FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
This section explains the racks in which the ETERNUS DX can be installed. 2.2.1 Fujitsu Racks The ETERNUS DX can be installed in a Fujitsu 19-inch rack. For information about whether the ETERNUS DX can be installed in an EOLed rack or not, contact your sales representative. 2.2.2...
Make sure to perform the installation according to the placement requirements described in "1.1 Installation Specifications" (page 11) "1.6 Installation Environment" (page 24). FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide Copyright 2014 FUJITSU LIMITED P3AM-7712-05ENZ0...
Page 50
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...