Microsoft Linkage; Figure 9.8 Solution - Virtualization Platform (Microsoft Linkage) - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 9 Solution Configuration
9.4 Virtualization Platform
9.4.3

Microsoft Linkage

■
Solution Overview
By linking with Microsoft System Center Virtual Machine Manager 2012 (SCVMM 2012), the resources and
functions of the ETERNUS DX can be controlled directly from the management console of System Center
2012.
Figure 9.8 Solution — Virtualization Platform (Microsoft Linkage)
Administrator
■
Configuration Procedure
Install any plug-ins that are required for function linkage and perform the necessary settings.
●
Required Environment
For linkage with System Center 2012, no plug-ins are required.
●
Configuration Procedure
SCVMM2012
Use ETERNUS Web GUI to enable the SMI-S settings in the ETERNUS DX.
If the management console for SCVMM2012 uses a different subnet, add the subnet to [Allowed IP List] in
[Set Network Environment].
When Windows Server 2012 is installed in the Hyper-V server, the ODX function is available for data copying.
Create ODX volumes after enabling the ODX settings for the Advanced Copy function in the ETERNUS DX with
ETERNUS Web GUI.
For details on the SCVMM2012 settings, refer to the manual of the SCVMM2012.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
SCVMM 2012
management console
SMI-S
Management server
147
Copyright 2014 FUJITSU LIMITED
SCVMM 2012
management environment
App App App
OS OS OS
Hyper-V
SAN
ETERNUS DX
App App App
OS OS OS
Hyper-V
P3AM-7732-05ENZ0