Fujitsu ETERNUS DX500 S3 Configuration Manual page 100

Chapter 6 SAN Connection Settings
6.2 Server Connection Setup
10
In the same way, repeat
Figure 6.1) on the server and the IP address of "CM#1 CA#0 Port#0" (D in
DX.
11
On the [iSCSI Initiator Properties] screen, click the [Targets] tab.
Confirm whether the specified contents in [The system will look for Targets on following portals] have
been applied correctly before checking connection.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Step 3 through Step 9 to specify the IP address of the other LAN card (B in
100
Copyright 2014 FUJITSU LIMITED
Figure 6.1) for the ETERNUS
P3AM-7732-05ENZ0