Driver Installation - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 2 Checking the Configuration Environment
2.2 Server Connection Preparation
2.2.2

Driver Installation

Install the LAN driver and the ETERNUS Multipath Driver.
■
LAN Driver Installation
The following procedure explains how to install the LAN driver.
When using the onboard LAN card, skip this procedure.
1
To install a LAN driver, refer to the instructions for the LAN card.
2
Check that the driver has correctly been installed.
■
ETERNUS Multipath Driver Installation
The following procedure explains how to install the ETERNUS Multipath Driver.
1
Insert the CD-ROM into the server, then from Windows Explorer double-click on "setup.msi" in the "Eng-
lish" folder of the CD-ROM.
A screen to confirm the start of installation appears.
2
Click the [Next] button.
A screen to specify the installation directory of the ETERNUS Multipath Driver and which user installs the
driver appears.
3
To change the installation directory, click the [Browse] button and select the installation directory. To
leave the settings unchanged, click the [Next] button.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
27
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0