Fujitsu ETERNUS DX500 S3 Configuration Manual page 66

Chapter 4 Monitoring Settings
4.2 Various Notification Settings
4
Set up a community or a user.
Set up the community or the user that is used for SNMP Trap.
To use SNMPv1 or SNMPv2c, perform the "Setup SNMP Agent Community" settings. To use SNMPv3,
•
perform the "Setup SNMP Agent User" settings.
• To use ETERNUS SF Storage Cruiser for management, perform the "Setup SNMP Agent Community"
settings to use SNMPv1.
Community setup
(1)
In [Action], click [Setup SNMP Community].
The [Setup SNMP Agent Community] screen appears.
(2)
In the community list of the [Setup SNMP Agent Community] screen, click the [Add] button.
(3)
Enter the community name, set the required items, and click the [OK] button.
The screen display returns to the community list of the [Setup SNMP Agent Community] screen.
(4)
Check the community name that was set in
[Set] button.
A confirmation screen appears.
(5)
Click the [OK] button.
The SNMP community settings are applied.
(6)
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Step (3)
66
Copyright 2014 FUJITSU LIMITED
is added in the community list and click the
P3AM-7732-05ENZ0