Fujitsu ETERNUS DX500 S3 Configuration Manual page 114

Chapter 6 SAN Connection Settings
6.2 Server Connection Setup
8
Check whether a file or other item can be created in the created drive.
■
SnapOPC+ Destination Settings
Set up the disk created in [Snap Data Volume].
1
During volume creation, right-click the disk created in [Snap Data Volume] and select [New Simple Vol-
ume].
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
114
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0