Raid Group Check; Volume Check - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 8 System Status Check
8.2

RAID Group Check

8.2 RAID Group Check
On the [RAID Group Details] screen of ETERNUS Web GUI, the status of RAID groups that you have created is
displayed. Check if RAID configuration is set correctly.
To display the [RAID Group Details] screen, click the [RAID Group] tab on the navigation of the ETERNUS Web
GUI screen. In the [RAID Group (Basic Information)] screen that appears, select which RAID group to check
the information for and click the No. or name of this RAID group.
8.3

Volume Check

On the [Volume Details] screen of ETERNUS Web GUI, the status of volumes that you have created is dis-
played. Check if volumes are set correctly.
To display the [Volume Details] screen, click the [Volume] tab on the navigation of the ETERNUS Web GUI
screen. In the [Volume (Basic Information)] screen that appears, select which volume to check the informa-
tion for and click the No. or name of this volume.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
130
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0