Fujitsu ETERNUS DX500 S3 Configuration Manual page 42

Chapter 3 General Settings
3.3 Storage Management (Initial Setup 1)
(2)
Click the [OK] button.
The name of the ETERNUS DX is set and the setting completion screen appears.
(3)
Click the [Done] button.
The [Change User Password] screen appears.
3
Changing user passwords
Change the user password.
(1)
Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2)
Click the [OK] button.
The password is changed and the change completion screen appears.
(3)
Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4
Thin Provisioning setup
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
42
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0