Figure 3.2 Example Of Creating Operation Volume And Backup Volume - Fujitsu ETERNUS DX500 S3 Configuration Manual

Chapter 3 General Settings
●
ETERNUS DX Environment
Create the operation volume and backup volume in the ETERNUS DX.

Figure 3.2 Example of Creating Operation Volume and Backup Volume

RAID group 0 (RAID5)
RAID group 1 (RAID5)
*1: SDV is used as the copy destination for SnapOPC+ and stores generation data.
*2: SDPV is the expansion area of the SDV and is used to configure the Snap Data Pool (SDP) area.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
ETERNUS DX
600GB × 5
2TB × 3
Copyright 2014 FUJITSU LIMITED
Operation volume
Standard
main
Generation management volume
Snap Data Volume (SDV) (*1)
sdv0 sdv1 sdv2
Copy data destination volume
Snap Data Pool Volume (*2)
sdpv 500GB
35
1TB
sdv3 sdv4 sdv5 sdv6
P3AM-7732-05ENZ0