Upper case, steering arm, swivel bracket and clamp brackets
Installing the steering arm
1. Install the washer 1 and bushing 2 onto
the steering arm 3.
2. Place the swivel bracket 4 in an upright
position, and then install the steering arm
onto the swivel bracket.
3. Install the bushing 5, O-ring 6, bushing
7, and washer 8 onto the swivel
bracket.
4. Install the steering arm 3 into the steer-
ing yoke 9 by aligning the center a of
the yoke with the center b of the steer-
ing arm.
5. Install the circlip 0.
69J1D11
6. Inject grease into the grease nipple until
grease comes out from both the upper
and lower bushings c.
1
2
3
4
5
6
7
8
9
7-16