LOWR
Removing the drive shaft
1. Remove the drive shaft assembly and
pinion, and then pull out the reverse gear
and thrust bearing.
È
Drive shaft holder 1: YB-06201
Disassembling the drive shaft
housing
1. Remove the cover, oil seals, and needle
bearing.
Drive shaft needle bearing remover
and installer 1:
YB-06196
Driver handle 2: YB-06071
Disassembling the reverse gear
1. Remove the needle bearing from the
reverse gear using a chisel.
6-43
Lower unit
Disassembling the lower case
1. Remove the retainer and shim(s).
È
Universal puller 1: YB-06117
Puller bolt 2: YB-41707
2. Remove the needle bearing from the
retainer.
Needle bearing installer 3:
YB-06434
Driver handle 4: YB-06071
3. Remove the needle bearing.
69J1D11