Removing The Steering Arm; Installing The Steering Arm - Yamaha F80BETL Service Manual

Removing the steering arm

1. Remove the circlip 1.
2. Remove the steering yoke 2 by striking
it with a plastic hammer.
3. Remove the steering arm from the swivel
bracket by pulling the arm off the bracket.

Installing the steering arm

1. Install the washer 1, bushing 2, O-ring
3, and bushing 4 onto the steering arm
5.
2. Place the swivel bracket 6 in an upright
position, and then install the steering arm
onto the swivel bracket.
6
3. Install the bushing 7, O-ring 8, and
washer 9 onto the swivel bracket.
6D93G11
2
1
S6D87230
5
1
2
A A
3
4
S6D87240
4. Install the steering yoke 0 to the steer-
ing arm 5 by aligning the center a of
the yoke with the center b of the steer-
ing arm.
5. Install the circlip A.
b
5
a
A
6. Inject grease into the grease nipple until
grease comes out from both the upper
and lower bushings c.
c
Steering arm
7
8
9
A A
S6D87250
A
0
S6D87260
c
A A
S60C7255
7-18
1
2
3
4
5
6
7
8
9